欢迎访问

河北程跃泵业有限公司

网站
联系方式
  • 电话:0312-3426976
  • 联系人:徐经理
  • 手机:13932271419
  • 手机2:15030285258
  • 业务QQ:632469545
  • 网站:www.bdcyhgb.com
  • 地址:河北安国市石佛镇路景工业园区景旺路8号

ZJ渣浆泵在试车时需检查什么?

date.png 2019-12-12 11:25:09

渣浆泵体系调试筹办试车时需检查以下环境:

1、用手盘泵轴,应能转动灵活,且不行有冲突的动静,若有冲突的声响,有不妨叶轮与前或后护板顶住,需调解叶轮间隙;

2、用手盘电机轴,应能转动灵活,接上电源检查电机转向,要包管泵的转向是从泵的进口看,叶轮应为逆时针扭转,绝不容许泵反转;

3、确定好电机扭转方向正确后,再按上柱销(直联传动)或皮带(皮带传动);

4、检查泵出口阀门是否封闭,确保关上出口阀门才气起动泵;

5、检查冷却水箱内的水位,应确保水足量,且包管水箱进出口水管内没有气体顶住;

6、泵不容许空转,应包管泵腔内充满介质,调试时用水也可;


During the commissioning of slurry pump system, the following environment shall be checked:


1. The pump shaft with hand plate shall be able to rotate flexibly without any conflict. If there is any conflict sound, the impeller may counter with the front or rear guard plate, and the impeller clearance shall be adjusted;


2. The motor shaft shall be able to rotate flexibly by hand. Connect the power supply to check the rotation direction of the motor. Make sure that the rotation direction of the pump is viewed from the inlet of the pump, and the impeller shall rotate counterclockwise, and the pump is not allowed to reverse;


3. After confirming the correct torsion direction of the motor, press the upper pin (direct drive) or belt (belt drive);


4. Check whether the pump outlet valve is closed, and ensure that the pump can be started only after the outlet valve is closed;


5. Check the water level in the cooling water tank to ensure that the water is sufficient and there is no gas in the inlet and outlet water pipes of the water tank;


6. The pump shall not be allowed to run idly. It shall be ensured that the pump cavity is full of medium and water can be used during commissioning;


联系方式

ico04
联系人

徐经理

ico01
电话

0312-3426976

ico06
手机

13932271419

ico05
QQ

632469545

ico03
邮箱

632469545@qq.com

ico02
地址

河北安国市石佛镇路景工业园区景旺路8号

 
<
线

商盟客服 >
您好,欢迎莅临我们的网站,欢迎咨询...

  • 徐经理: 点击这里给我发消息